Overview
Works with Jaguar Land Rover Pathfinder software
Covers DoIP, CAN, MultiCAN protocols
2m USB Cable as standard included
Easy to update for D-PDU new functionality updates
What does the DA-DoIP Dongle do?
The DA-DoIP Dongle connects directly to the vehicle OBDII (Diagnostic) connector, it then connects to the laptop via a USB cable for use with Jaguar Land Rover Pathfinder. Once the D-PDU driver files are loaded, this product will allow normal operation with the Jaguar Land Rover Pathfinder software. The DA-DoIP Dongle has been verified and tested by Jaguar Land Rover for the correct operation.
How does the DA DoIP Dongle operate?
The DA-DoIP Dongle is simple and easy to use. The D-PDU drivers are available to download and install from our website. Connect the DA-DoIP Dongle device to the vehicle OBDII connector (the device powers from the vehicle). Connect the 2m USB cable to the DA-DoIP Dongle and the other end to the Pathfinder Laptop. The (PWR) LED will turn solid red to show the DA-DoIP Dongle is powered. During communication with the vehicle the Status (STS) LED will flash green.
How does the DA-DoIP Dongle get updated for future Software Updates?
Periodically we will update the device's firmware via the DA App Hub and other supporting software via our website. These updates are necessary to either release further device functionality or to resolve field issues.
If problems are experienced during device use, always make sure that the latest device software and drivers have been installed.
Vehicle Coverage:
The DA-DoIP Dongle has been tested by Jaguar Land Rover on the latest vehicle range covered by Pathfinder.
*Note: It does not support older ISO9141, J1850 PWM protocols or FEPS programming voltages found on older vehicles.
**Note : A separate subscription is required for JLR TOPIX SDD/Pathfinder diagnostic platforms.
DA D-PDU Device Setup
The DA D-PDU Device Setup application is required for the DA-DoIP Dongle and the JLR DoIP SST D-PDU Pass-Thru device drivers. This application installs the required PC interface files to allow the support of the ISO D-PDU Pass-Thru standard.
It is important to use the latest version of DA device software in conjunction with the PC device drivers. This can be updated using the DA App Hub available from this website.
D-PDU Pass-Thru device users should follow the procedure below when first using their DA D-PDU devices to work with OEM PC applications:
Please Note: A reboot may be required after the DA D-PDU Device Setup is installed to complete driver installation.
Once you have installed the D-PDU drivers onto your target PC you should connect your DA D-PDU communications device to the vehicle before connecting to the target PC (via the USB cable). If you have done this correctly you will see the STS LED on the device flashing RED & GREEN and the PWR LED will be illuminated RED. When you are in this correct state your device is now ready to be used. This sequence must be followed for each subsequent connection to a vehicle (i.e. connect device to vehicle then connect device to target PC).
The following link contains required setup files
https://s3.eu-west-2.amazonaws.com/dafilestore.da-cloudservices.com/DA_PDU_API_V1_2_3.zip
