**This procedure CAN ONLY be used on vehicles built in USA.

**You MUST HAVE two working programmed Remote/keys before
?ÿ?ÿ?ÿ you can add?ÿ a third remote/key.

**If you only have ONE WORKING REMOTE/KEY and want to add a
?ÿ?ÿ second key this procedure WILL NOT WORK.

*** in your area to program remote/key
?ÿ?ÿ?ÿ?ÿ?ÿ if you only have one or none working remote/keys.

1.?ÿ Using first programmed remote/key turn ignition to the ON position
?ÿ?ÿ?ÿ?ÿ for 5 seconds. (Do not crank engine). Turn remote/key off and remove.

2.?ÿ Within 5 seconds insert second working programmed remote/key.
?ÿ?ÿ?ÿ?ÿ Turn ignition to the ON position (Do not crank engine) security light
?ÿ?ÿ?ÿ?ÿ will begin to flash and chime will be heard within 10 seconds. Turn
?ÿ?ÿ?ÿ?ÿ remote/key off and remove. NOTE: Some vehicles will not chime,
?ÿ?ÿ?ÿ?ÿ only the security light will flash.

3.?ÿ Within 5 seconds insert third NEW CUT remote/key and turn ignition to
?ÿ?ÿ?ÿ?ÿ the ON?ÿ position (Do not crank engine). The security light should start
?ÿ?ÿ?ÿ?ÿ flashing and within 10 seconds you should hear a chime and the
?ÿ?ÿ?ÿ?ÿ security light should go out. Once the security light goes out, the new
?ÿ?ÿ?ÿ?ÿ remote/key should be programmed. Turn remote/key to the OFF
?ÿ?ÿ?ÿ?ÿ position, remove key.

4.?ÿ Test key and remote.

?ÿ ?ÿ ?ÿ?ÿ