**This procedure CAN ONLY be used on vehicles built in USA.

**You MUST HAVE two working programmed Remote/keys before
    you can add  a third remote/key.

**If you only have ONE WORKING REMOTE/KEY and want to add a
   second key this procedure WILL NOT WORK.

*** in your area to program remote/key
      if you only have one or none working remote/keys.

1.  Using first programmed remote/key turn ignition to the ON position
     for 5 seconds. (Do not crank engine). Turn remote/key off and remove.

2.  Within 5 seconds insert second working programmed remote/key.
     Turn ignition to the ON position (Do not crank engine) security light
     will begin to flash and chime will be heard within 10 seconds. Turn
     remote/key off and remove. NOTE: Some vehicles will not chime,
     only the security light will flash.

3.  Within 5 seconds insert third NEW CUT remote/key and turn ignition to
     the ON  position (Do not crank engine). The security light should start
     flashing and within 10 seconds you should hear a chime and the
     security light should go out. Once the security light goes out, the new
     remote/key should be programmed. Turn remote/key to the OFF
     position, remove key.

4.  Test key and remote.