Select Your Vehicle

2009 - 2012 Dodge Ram

  • SKU: FOBIK-2250
  • Buttons Info: L,U,P

2009 Is A Split Year Between Rhk And Fobik - Insert Key Included

Have all keys for the Dodge/Chrysler/Jeep ready – You must have two working programmed or original keys to use this procedure *** 2010+ VEHICLES MUST BE PROGRAMMED BY AN AUTOMOTIVE LOCKSMITH OR DEALER *** ***If ignition recall was performed on your vehicle, the DIY programming won’t be available*** ATTENTION DODGE RAM OWNERS: Some 2009 and up DODGE RAM’S may require dealer programming. If you have a 2009 DODGE RAM, please contact your local dealership to see if your vehicle requires dealer programming. 1. Insert first programmed key into the ignition and turn ignition switch to ON. Wait for approximately 3 seconds then turn ignition to OFF and remove key. 2. Within 15 seconds of removing first key insert second programmed key into ignition and turn ignition switch to ON. Wait approximately 10 seconds. You will see the immobilizer warning lamp illuminate on the dash and you will hear an audible tone.Turn ignition OFF and remove the key. 3. Within 50 seconds insert the new unprogrammed key into ignition. Turn ignition switch to ON. After approximately 10 seconds you should hear an audible tone and the immobilizer lamp will remain illuminated for 3 seconds. Once this occurs programming is completed. 4. For each additional key you must repeat these steps starting with step number 1.