NOTE: When putting the system in programming mode all remote codes will be deleted automatically. So, make sure to reprogram your existing remotes after programming the new one.

1. Open the trunk.
2. Close and lock all doors with power door lock on the driver’s door.
3. Insert key in ignition and remove it 6 to 8 times within 10 seconds.  Make sure withdraw the key completely each time. If you do it too fast the vehicle will not enter programming mode.

4. Manually unlock and lock the driver door by hand once with the manual knob. (Do not use power lock button)
5. In 5 seconds push the LOCK button on the remote.

6. If there are any other remotes you wish to program including your old ones then repeat step 4 and 5 for each remote.  You may program up to 4 remotes.
7. Unlock driver’s door with manual lock knob, open driver’s door and close it.