Obtain all remote transmitters for this vehicle. FOR FACTORY INSTALLED KEYLESS ENTRY USE THIS PROCEDURE 1. With the key out of the ignition remove the mirror adjustment switch from door and unplug harness. Jump pin 2 to pin 10 on the mirror adjustment harness. When done correctly vehicle will automatically cycle the door locks to LOCK and then UNLOCK. 2. Press any button on first remote to be programmed. Door locks should automatically cycle again to show acceptance of remote. 3. Repeat step 2 for any remaining remotes to be programmed. 4. Once all remotes are programmed remove jumper wire and replace mirror adjustment switch. Test all remotes to ensure proper programming.